WHAT’S IN THE STARLIGHT KIT

1 x LED Module
2 x 14 Fiber Optic Cables (1m in length)
1 x Power Link Cable or
12V, 2A Power Supply

The StarEFX™ Starlight Kits fibre optic cables are approximately 1 meter in length with an endpoint of 0.75 mm. The light shines through the LED Module to each fibre cable and then to each endpoint, where it shines the brightest.

Fibre cables do not have an electric current, making them safe to touch, as no heat passes through them. They are also flexible and can be moulded to any organic shape without affecting the light output.

HOW MANY STARS CAN I HAVE?

Each Starlight kit comes with 28 fibre optic endpoints (stars).

Need more?

With a power link cable, you can connect up to 25 starlight kits to the 1 power supply. This means less cable management and more creativity in your designs.

Each Starlight Kit comes with 28 endpoints, so small designs can be done without waste, making the kit cost-effective for smaller projects. In addition, at any point in time, when you look at your design and think, “That’s not enough stars!” you can purchase another kit and easily add the fibres via the power link cable.

With 25 Starlight Kits linked up, your designs could have up to 700 stars (endpoints), all powered up by 1 power supply.

INSTALLATION

D.I.Y installation is easy.

1. Work out what design you want
2. Poke through the fibre cables into the acoustic foam panels (cables can then be cut to the desired length if needed.)
3. Stick the acoustic foam panels to the wall/ceiling.
4. Plug in your power, sit back and relax to watch your starlights shimmer. If you already have foam panels but want to add starlights to them, you can purchase the StarEFX™ Starlight Kit here.